缩写名/全名 |
INT J MATER FORM
International Journal of Material Forming |
||||||||||||||||
ISSN号 | 1960-6206 | ||||||||||||||||
研究方向 | ENGINEERING, MANUFACTURING-MATERIALS SCIENCE, MULTIDISCIPLINARY | ||||||||||||||||
影响因子 | 2015:1.241, 2016:1.978, 2017:1.936, 2018:1.75, 2019:1.634, | ||||||||||||||||
出版国家 | FRANCE | ||||||||||||||||
出版周期 | |||||||||||||||||
年文章数 | 75 | ||||||||||||||||
出版年份 | 0 | ||||||||||||||||
是否OA | No | ||||||||||||||||
审稿周期(仅供参考) | >12周,或约稿 |
||||||||||||||||
录用比例 | 容易 | ||||||||||||||||
投稿链接 | https://www.editorialmanager.com/ijfo/default.aspx | ||||||||||||||||
投稿官网 | http://www.springer.com/engineering/production+engineering/journal/12289 | ||||||||||||||||
h-index | 30 | ||||||||||||||||
CiteScore |
|
||||||||||||||||
PubMed Central (PMC)链接 | http://www.ncbi.nlm.nih.gov/nlmcatalog?term=1960-6206%5BISSN%5D | ||||||||||||||||
中科院SCI期刊分区 ( 2018年新版本) |
|
||||||||||||||||
中科院SCI期刊分区 ( 2020年新版本) |
|
中国学者近期发表的论文 | |
1. | Effect of process parameters on the roundness of GH3030 continuously variable wall conical rotatory part formed by power spinning Author: Xuedao Shu, Ying Zhu, Yu Wang, Zixuan Li, Zewei Cen Journal: International Journal of Material Forming, 2019, Vol., , DOI:10.1007/s12289-019-01483-6 DOI |
2. | 3D FEM-DEM coupling analysis for granular-media-based thin-wall elbow tube push-bending process Author: Hai Liu, Shi-Hong Zhang, Hong-Wu Song, Gao-Lian Shi, Ming Cheng Journal: International Journal of Material Forming, 2019, Vol., , DOI:10.1007/s12289-019-01473-8 DOI |
3. | Numerical analysis and experimental investigation of surface defects in die hemming process Author: Gang Wang, Zhengwei Gu, Hong Xu, Ge Yu Journal: International Journal of Material Forming, 2019, Vol., , DOI:10.1007/s12289-019-01470-x DOI |
4. | Effect of constitutive model on springback prediction of MP980 and AA6022-T4 Author: Jianping Lin, Yong Hou, Junying Min, Huijun Tang, John E. Carsley, Thomas B. Stoughton Journal: International Journal of Material Forming, 2019, Vol., , DOI:10.1007/s12289-018-01468-x DOI |
5. | Global-cumulative incremental hole-flanging by tools with complementary-shape cross section Author: Huan Zhang, Huaqing Ren, Jun Chen, Jian Cao Journal: International Journal of Material Forming, 2018, Vol., , DOI:10.1007/s12289-018-01460-5 DOI |
6. | Effects of wrinkling prevention forming method using paraffin on forming accuracy for 1060 aluminum sheet metal Author: Liyan Wang, Mingzhe Li Journal: International Journal of Material Forming, 2018, Vol., , DOI:10.1007/s12289-018-01459-y DOI |
7. | Reduction of springback by intelligent sampling-based LSSVR metamodel-based optimization Author: Enying Li Journal: International Journal of Material Forming, 2011, Vol.6, 103-114, DOI:10.1007/s12289-011-1076-1 DOI |
8. | A single stage hot forging process and die set of alternator poles Author: Cheng Yang, Shengdun Zhao, Jianjun Zhang Journal: International Journal of Material Forming, 2012, Vol.6, 511-517, DOI:10.1007/s12289-012-1103-x DOI |
9. | Estimation of heat flux at metal-mold interface during solidification of cylindrical casting Author: L. Q. Zhang, R. J. Wang Journal: International Journal of Material Forming, 2012, Vol.6, 453-458, DOI:10.1007/s12289-012-1098-3 DOI |
10. | Numerical and experimental investigations in electromagnetic riveting with different rivet dies Author: Junjia Cui, Lin Qi, Hao Jiang, Guangyao Li, Xu Zhang Journal: International Journal of Material Forming, 2017, Vol., , DOI:10.1007/s12289-017-1394-z DOI |
|
|